Changes to Step #14

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the lead screw - Part 1
-[* 1] Insert wisdom here
+[* 2] 688ZZ Ball bearing
+ [* 10] Push the ball bearing against the inner side of the plate, ensuring it stays inside the designated groove.
+[* 3] Push the Lead Screw through the hole in the ball bearing
+[* 4] Precision Shim 12x8x1mm
+ [* 10] Slide the Precision Shim on to the Lead Screw