Changes to Step #17

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the lead screw - Part 4
-[* 2] Insert wisdom here
+[* 2] Lock Collar
+ [* 10] The Precision Shim 12x8x1mm should be in between the 688ZZ Ball bearing and the Lock Collar
+[* 3] Insert the lead screw in the following order: lock collar, precision shim, and ball bearing.
+[* 5] Thrust Bearing F8-16M
+ [* 10] Install the Thrust Bearing on to the exposed end of the Lead Screw as shown
+[* 6] Jog wheel
+ [* 10] Install the Jog wheel on to the exposed end of the Lead Screw as shown