Changes to Step #18
Step Lines
| [title] Install the Jog wheel | |
| [* 2] Install the Jog wheel on to the exposed end of the Lead Screw as shown | |
| - | [* 3] Ensure the lead screw surface is |
| + | [* 3] Ensure the lead screw surface is roughly1-2mm inside the jog wheel |
| [* 4] After positioning the jog wheel, tighten the two set screws to secure it in place. | |
| [* 5] Pull the Y joiner plate away from the jog wheel, as to ensure the jog wheel and thrust bearing sit tight against the front Y plate. | |
| [* 9] Excessive force is unnecessary, as it may cause the lead screw to bind. | |
| [* 6] Push the lock collar against the Y front plate. | |
| [* 7] Tighten the set screw on the lock collar to secure it in place. |