Changes to Step #20

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the stepper motor - Part 2
-[* 1] Insert wisdom here
+[* 2] Gently push the coupler against the Thrust Bearing and tighten the set screw.
+[* 3] Push the lock collar against the Y rear plate.
+ [* 4] Tighten the set screw on the lock collar to secure it in place.
+[* 10] Rotate the coupler to verify that the lead screw moves smoothly and the Y joiner plate operates as expected.