Changes to Step #2

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Assemble the X endstop
+[* 2] 2x M3x16 Cap Head Screw
+[* 3] SN04-N2 Proximity Sensor
+[* 4] mill_x_endstop_mount printed part
+[* 5] X endstop assembly
+[* 6] The endstop will be mounted with M3x30 cap head screw, on to the shown threaded holes.
+[* 8] Make sure the endstop is facing the same side as the bearing groove.