Changes to Step #2

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the X endstop
[* 2] 2x M3x16 Cap Head Screw
[* 3] SN04-N2 Proximity Sensor
[* 4] mill_x_endstop_mount printed part
[* 5] X endstop assembly
-[* 6] The endstop will be mounted with M3x30 cap head screw, on to the shown threaded holes.
+[* 6] 2x M3x30 Cap Head Screws
+ [* 6] The endstop will be mounted with M3x30 cap head screw, on to the shown threaded holes.
[* 8] Make sure the endstop is facing the same side as the bearing groove.