Changes to Step #8

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] X linear rails
[* 2] Place one X linear rail assembly on the designated T-slot.
[* 3] Insert the two align_40120_mgn15 printed jigs in the T-Slot and rail.
[* 4] Ensure the Y rail is stirring flush against the Mill front Y plate.
[* 10] Make sure the align_40120_mgn15 printed jigs are correctly placed and centering the rail on the T-slot
[* 5] Tighten the linear rails screws one at a time starting from the front and making your way towards the back, one by one.
- [* 10] MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binging.
+ [* 10] MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding.