Changes to Step #14

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] X Linear rails - Part 3
-[* 2] Install the X Joiner assembly on the linear rails.
+[* 2] Install the X Joiner assembly on the linear rails, as shown.
[* 3] Using the 16x M3x6 Cap Head screws, fasten the XY joiner plate assembly to the mgn15 carriages.
[* 10] MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binging.
[* 10] Tip: Blue thread lock can be added to the thread of the M3x6 Cap Head screws.