Changes to Step #24

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Install the Stepper motor
+[* 2] 4x 40mm Aluminium Spacer
+[* 3] Nema 23 Stepper Motor High Torque
+[* 4] 4x M5x50 Cap Head Screw
+[* 10] Assemble the components above as shown.
+[* 5] Tighten the set screw on the coupler, to secure the stepper motor shaft to it.
+[* 7] Insert the mill_stepper_cable_management printed part as shown.