Changes to Step #7
Step Lines
| - | [title] Assemble the |
|---|---|
| + | [title] Assemble the X MGN15 linear rails |
| [* 9] Do not allow the linear rail carriages to leave the end of the rail at any point | |
| [* 2] MGN15 Linear Rail | |
| [* 3] Insert an M3x16 cap head screw in each of the holes on the linear rail | |
| [* 4] Loosely thread a 4040 T-Nut on to each of the M3x16 screws | |
| [* 10] Repeat these instructions for the second linear rail |