| - | [* 1] Insert wisdom here |
|---|
| + | [title] Z linear rails |
|---|
| + | [* 2] Place one Z linear rail assembly on the designated T-slot. |
|---|
| + | [* 3] Insert the two align_40120_mgn15 printed jigs in the T-Slot and rail. |
|---|
| + | [* 11] Make sure the align_40120_mgn15 printed jigs are correctly placed and centering the rail on the T-slot |
|---|
| + | [* 4] Tighten the linear rails screws one at a time starting from the front and making your way towards the back, one by one. |
|---|
| + | [* 10] MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding. |
|---|