| - | [* 1] Insert wisdom here |
|---|
| + | [title] Ensure a smooth axis movement |
|---|
| + | [* 10] While the second linear rail remains loose, the Z plate should move smoothly without resistance. If you experience any binding or drag, slightly loosen the carriage screws, as they may be overtightened. |
|---|
| + | [* 9] Be careful to ensure that the Z joiner plate carriages do not detach from the linear rail during the process. |
|---|
| + | [* 2] Move the Z joiner fully to the front as demonstrated. Then, gradually move it toward the back, exposing one linear rail screw at a time, and tighten each screw as you progress. |
|---|
| + | [* 3] Ensure that all linear rail screws are tightened from front to back. Avoid overtightening, as this may cause binding and restrict movement. |
|---|
| + | [* 10] MGN15 Rails should be tightened to 98 N-cm of torque, overtightening the screws will result in rail binding. |
|---|