Changes to Step #14

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Install the lead screw - Part 2
+[* 2] Thrust Bearing F8-16M
+ [* 10] Install the Thrust Bearing on to the exposed end of the Lead Screw as shown
+[* 3] Lock Collar
+ [* 10] The Precision Shim 12x8x1mm should be in between the 688ZZ Ball bearing and the Lock Collar
+[* 4] Screw the Lead Screw through both Nut Blocks under the Y joiner plate.