Changes to Step #15

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[* 2] Lock Collar
+ [* 10] Slide the Lock Collar on to the Lead Screw
+[* 3] Precision Shim 12x8x1mm
+ [* 10] Slide the Precision Shim on to the Lead Screw
+[* 4] Ensure the lead screw surface is roughly1-2mm inside the plate.
+[* 5] Tighten the set screw on the lock collar to secure it in place.