Changes to Step #16

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[* 2] Precision Shim 12x8x1mm
+ [* 10] Slide the Precision Shim on to the Lead Screw
+[* 3] Coupler - Disk Type
+ [* 10] Install the Coupler on to the exposed end of the Lead Screw.
+[* 4] Push the coupler against the metal plate and tighten the set screw.
+[* 5] Push the lock collar against the axial bearing to ensure the axial bearing is making full contact with both surfaces.
+[* 6] Tighten the set screw on the lock collar.