Changes to Step #21
Step Lines
| + | [title] Assemble the Z-Axis |
|---|---|
| + | [* 2] Place the Z-axis assembly on the Z tower, ensuring the M8 Low Head |
| + | [* 9] The Z-axis is heavy and difficult to manage alone. Please request assistance from another person to hold the Z-axis while you tighten the screws. |
| + | [* 10] Assemble the M8x25 cap head screws by inserting them through the M8 washers and the Z plates. Then, place an M8 washer on the rear and secure everything with an M8 nylon locking nut. |
| + | [* 3] 4x M8x25 Cap Head Screw |
| + | [* 4] 8x M8 Washer |
| + | [* 5] 4x M8 Nylon Locking Hex Nut |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added