Changes to Step #5

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Install the spindle mounts
[* 2] Spindle Mount Assembly
[* 3] Mount the Spindle mount assembly on to the Z-Axis
[* 4] The spindle mounts should be as far apart as possible from each other. Aim for a 90-100mm distance between the two spindle mounts.
+[* 10] Do not fully tighten the spindle mounts. Lightly screw them in place to prevent them from falling off. They will be aligned in the next step.