Changes to Step #7
Step Lines
| + | [title] Install the water cooling hose |
|---|---|
| + | [* 10] It does not matter whether you install the water inlet or outlet first. |
| + | [* 2] Remove the water hose nut from the spindle and pass the water hose through. |
| + | [* 3] Insert the tip of the water hose into the spindle's water inlet. |
| + | [* 10] ***Tip:*** If the water hose is difficult to insert, you may use a lighter or heat blower to soften the tip. However, exercise caution to avoid damaging the hose. After warming it, carefully insert it into the spindle's water inlet. |
| + | [* 9] Proceed with caution and do this at your own risk, as the plastic may become hot and cause burns. Use a towel or cloth to handle the warmed hose safely. |
| + | [* 4] Slide the water hose nut down and securely tighten it onto the spindle inlet thread. |
| + | [* 5] Repeat the previous steps and install the water hose outlet. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added