Changes to Step #1
Step Lines
| + | [title] Identifying stepper motor coil wires (without a multimeter) |
|---|---|
| + | [* 11] This procedure can be found on the OpenBuilds Documentation, for further information click [link|https://docs.openbuilds.com/doku.php?id=docs:blackbox-x32:faq-identify-motor-coils|here.] |
| + | [* 1] Follow this step if you don't have access to a multimeter. Otherwise, Skip to Step 2. |
| + | [* 2] If the two wires you joined together belong to the same coil, the shaft will become significantly harder to turn by hand. |
| + | [* 3] If that shaft still spins easily, you have not identified a coil yet, and you must try a different combination of wires. |
| + | [* 10] If you join together two wires that do result in the motor presenting resistance against turning, you can label these two wires as belonging to the same coil. |
Image 1
No previous image
Added
Image 2
No previous image
Added