Changes to Step #3
Step Lines
| + | [title] Identifying stepper motor coil wires - Insert the Xtension connector |
|---|---|
| + | [* 2] Xtension Connector - 4 Pin |
| + | [* 10] Insert an Xtension connector (male) onto the stepper wires. The previously identified coil pairs must be next to each other. They are now designated as A pair and B pair. The + and - don't really matter at this point as long as the coil ends are together. |
| + | [* 9] Your stepper wire colours might be different, please proceed with the correct coil pairs for your set-up. |
| + | [* 11] Repeat the coil identification step and this step for the remaining stepper motors. |
Image 1
No previous image
Added