Changes to Step #3
Step Lines
| + | [title] Assemble the frame - Part 1 |
|---|---|
| + | [* 2] 2x Hidden three-way corner assembly from the last step |
| + | [* 3] 1x T-Slot extrusion 3030 - 160mm |
| + | [* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws. |
| + | [* 4] Tighten the M6x8 set screws. |
| + | [* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner. |
| + | [* 5] Prepare two assemblies |
| + | [* 6] 2x T-Slot extrusion 3030 - 400mm |
| + | [* 10] Assemble the parts as shown. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added