Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[* 2] 2x Hidden three-way corner assembly from the last step
+[* 3] 1x T-Slot extrusion 3030 - 160mm
+[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
+[* 4] Tighten the M6x8 set screws.
+[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.
+[* 5] Prepare two assemblies
+[* 6] 2x T-Slot extrusion 3030 - 400mm
+[* 10] Assemble the parts as shown.