Changes to Step #3

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Assemble the frame - Part 1
[* 2] 2x Hidden three-way corner assembly from the last step
[* 3] 1x T-Slot extrusion 3030 - 160mm
[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
[* 4] Tighten the M6x8 set screws.
[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.
[* 5] Prepare two assemblies
[* 6] 2x T-Slot extrusion 3030 - 400mm
[* 10] Assemble the parts as shown.