| | [* 2] Tighten the M6x8 set screws. |
|---|
| | [* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner. |
|---|
| | [* 3] 4x T-Slot extrusion 3030 - 448mm |
|---|
| | [* 10] Insert the T-slot Exstrusions in the three way hidden corner as shown. |
|---|
| | [* 4] Tighten the M6x8 set screws. |
|---|
| | [* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws. |
|---|
| | [* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner. |
|---|