Changes to Step #5

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

-[* 1] Insert wisdom here
+[title] Assemble the frame - Part 3
+[* 2] Fram assembly from ***Step 2***
+ [* 10] Insert the T-slot Exstrusions in the three way hidden corner as shown.
+[* 3] Tighten the M6x8 set screws.
+[* 9] Ensure the extrusions are flush and square with the hidden three way corner assembly before and after tightening the screws.
+[* 9] Be careful while tightening the set screws, extreme force may break the three way hidden corner.