Changes to Step #10

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the cable guides
-[* 2] M3x6 Cap Head Screw + M3 Washer
+[* 2] (26x) M3x6 Cap Head Screw + M3 Washer
[* 10] Insert a screw and washer from the front of the plate in every marked hole
[* 3] Secure the eight vc4_cable_guide_4 assembly using M3x6 screws and heat inserts in the back at the designated locations.
[* 4] Secure the five vc4_cable_guide_5 assembly using M3x6 screws and heat inserts in the back at the designated locations.