Changes to Step #6
Step Lines
| + | [title] Assemble the frame magnet mounts |
|---|---|
| + | [* 2] vc4_magnet_frame |
| + | [* 3] Magnet - Neodymium disc 10x4mm |
| + | [* 4] 3030 Drop-in T-Nut - M6 |
| + | [* 5] M6x12 Cap Head Screw |
| + | [* 10] Loosely thread the 3030 T-Nuts onto the M6x12 screws. Do not tighten them at this point. |
| + | [* 9] Please verify the magnet polarity in relation to the magnets on the door panel. If the polarity is inverted, the magnets will repel each other instead of attracting. |
| + | [* 10] Prepare 4 assemblies |
Image 1
No previous image
Added
Image 2
No previous image
Added