Changes to Step #9

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the left panel - Part 4
[* 2] CNC Electronics Start Button Switch - Green
-[* 3] Insert the ferrule end of wire (3) in one of the start button terminals.
+[* 3] Insert the ferrule end of ***wire (3)*** in one of the start button terminals.
[* 10] Insert the Start button and wires through the left panel.
[* 4] Start button panel nut
[* 10] Thread the start button panel nut onto the start button to secure it to the panel.
-[* 5] Insert the ferrule end of wire (2) coming from the E-stop button in the other start button terminal.
+[* 5] Insert the ferrule end of ***wire (2)*** coming from the E-stop button in the other start button terminal.