Changes to Step #17
Step Lines
| + | [title] Assemble the right panel - Part 4 |
|---|---|
| + | [* 2] Right panel assembly |
| + | [* 3] 2x Fan - 120mm x 15mm |
| + | [* 4] 2x Fan Grille - 120mm - Black |
| + | [* 5] 8x Self Tapping Screw - Plastic Fan - 12mm |
| + | [* 10] Insert the self-tapping screws through the fan grill and the right panel assembly, then thread them into the 120mm fans. |
| + | [* 9] Do not overtighten the screws, as this may damage the fan body. |
| + | [* 6] Insert the IPEX to SMA Female WiFi Pigtail into the right panel assembly and secure it with its panel lock nut. |
| + | [* 7] Thread the SMA 2.4GHz WiFi Antenna to the previously installed IPEX to SMA female WIFI Pigtail. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added