Changes to Step #20

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Assemble the bottom panel - Part 1
[* 2] Rat Rig Universal CNC Electronics Enclosure - bottom
[* 3] (8x) M5x12 Cap Head Screw + M5 Washer
[* 4] 8x 3030 Drop-in T-Nut - M5
-[* 10] Insert a M5x12 Cap Head Screw into each marked hole on the right panel and loosely tighten a M5 drop-in T-nut to each screw.
+[* 10] Insert an M5x12 Cap Head Screw into each marked hole on the right panel and loosely tighten a M5 drop-in T-nut to each screw.
[* 5] 4x M5x16 Cap Head Screw
[* 6] 4x Rubber foot with metal insert - Heavy Duty
[* 8] 4x 3030 Drop-in T-Nut - M5
[* 10] Insert the M5x16 Cap Head Screws into the Rubber foot and through the panel, then loosely tighten the Drop-in T-nuts.