Changes to Step #7
Step Lines
| + | [title] Prepare the Emergency button |
|---|---|
| + | [* 2] Open the emergency button by removing the four screws |
| + | [* 3] Open a hole on the emergency button body, either by snapping a removable disk or drilling a hole |
| + | [* 11] Prepare wire included in the E-Stop button box by cutting it in half. This must be long enough to connect the button to the PSU and Rodent. |
| + | [* 5] Insert one wire on one side |
| + | [* 11] Make sure to feed the wires through the hole made previously and close the emergency button with the four screws. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added