Changes to Step #7
Step Lines
| [title] Prepare the Emergency button | |
| [* 2] Open the emergency button by removing the four screws | |
| [* 3] Open a hole on the emergency button body, either by snapping a removable disk or drilling a hole | |
| - | [* 11] Prepare wire included in the E-Stop button box by cutting it in half. This must be long enough to connect the button to the PSU and Rodent. |
| - | [* 5] Insert one wire on one side |
| - | [* 11] Make sure to feed the wires through the hole made previously and close the emergency button with the four screws. |
| + | [* 10] Install the black cover on the E-stop button, don't use the screws. |