Changes to this Step

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Wire the Power supply
+[* 2] 740mm - 16AWG RED (A-Fork, B-Ferrule) (7)
+ [* 10] This wire should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the +24V RED PTFix terminal.
+[* 3] 740mm - 16AWG BLACK (A-Fork, B-Ferrule) (8)
+ [* 10] This wire should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the -24V BLACK PTFix terminal.
+[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.

Image 1

No previous image

New image

Added