Changes to Step #10
Step Lines
| [title] Wire the 5V power supply | |
| [* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires: | |
| [* 2] XXmm - 18AWG BROWN (A-Fork, B-Ferrule) (XX) | |
| [* 3] XXmm - 18AWG BLUE (A-Fork, B-Ferrule) (XX) | |
| [* 4] XXmm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (XX) | |
| - | [* 5] |
| - | [* 6] |
| + | [* 5] 2x 400mm - 22AWG BLACK (A-Ferrule, B-Fork) (13) '' Overlay the two forks in the screw terminal.'' |
| + | [* 6] 400mm - 22AWG RED (A-Ferrule, B-Fork) (12) |
| [* 10] Connect all the wires above to the power supply, using the fork connectors on each wire | |
| [* 9] After insertion, attempt to pull the wire to verify that it is securely attached |