Changes to Step #13
Step Lines
| [title] Wire the 24V power supply | |
| [* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires: | |
| - | [* 2] |
| - | [* 3] |
| + | [* 2] 600mm - 16AWG RED (A-Fork, B-Ferrule) (7) |
| + | [* 3] 600mm - 22AWG BLACK (A-Fork, B-Ferrule) (8) |
| [* 4] XXmm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (XX) | |
| [* 5] XXmm - 18AWG BLUE (A-Fork, B-Ferrule) (XX) | |
| [* 6] XXmm - 18AWG BROWN (A-Fork, B-Ferrule) (XX) | |
| [* 10] Connect all the wires above to the power supply, using the fork connectors on each wire | |
| [* 9] After insertion, attempt to pull the wire to verify that it is securely attached |