| | [* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires: |
|---|
| | [* 2] 2x 800mm - 16AWG RED (A-Fork, B-Ferrule) (15) |
|---|
| | [* 3] 2x 800mm - 16AWG BLACK (A-Fork, B-Ferrule) (16) |
|---|
| | [* 4] 200mm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (26) |
|---|
| | [* 5] 200mm - 18AWG BLUE (A-Fork, B-Ferrule) (25) |
|---|
| | [* 6] 200mm - 18AWG BROWN (A-Fork, B-Ferrule) (26) |
|---|
| | [* 10] Connect all the wires above to the power supply, using the fork connectors on each wire |
|---|
| | [* 9] After insertion, attempt to pull the wire to verify that it is securely attached |
|---|