Changes to Step #24
Step Lines
| + | [title] Wire the following components |
|---|---|
| + | [* 2] ***3x 100mm - 22AWG RED (A-Ferrule, B-Ferrule) (18)*** Connect one end to the Red PTFix block and the other to I6+ terminal on port 2 of the AXBB-E. |
| + | [* 10] Repeat the previous Step and connect I5+ and I4+ the the Red PTFix Block. |
| + | [* 3] ***900mm - Multicore 2 Conductor - 24AWG (A-2xFerrule, B-2xFerrule) (19)*** Connect the 2 wire cable to from the VFD and AXBB-E |
| + | [* 10] Use the ***Red wire*** for the ***VI*** terminal on the VFD and ***A01*** analog input on the AXBB-E |
| + | [* 10] Use the ***Black wire*** for the ***black PTFix Block***and ***ACM*** terminal on the VFD. |
Image 1
No previous image
Added
Image 2
No previous image
Added