Changes to Step #7
Step Lines
| + | [title] Wire the contactor - Part 1 |
|---|---|
| + | [* 2] 120mm - 16AWG RED (A-Fork, B-Fork) (4) |
| + | [* 10] Insert wire (4) in the 13NO terminal on the contactor and connect it to the A1 terminal of the contactor. |
| + | [* 9] After insertion, attempt to pull the wire to verify that it is securely attached. |
| + | [* 3] 800mm - 16AWG RED (A-Fork, B-Ferrule) (5) |
| + | [* 10] Insert wire (5) in the 5/L3 terminal on the contactor and connect it to the +24V Red PTFix block. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added