Changes to Step #7

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the contactor - Part 1
[* 2] 120mm - 16AWG RED (A-Fork, B-Fork) (4)
- [* 10] Insert wire (4) in the 13NO terminal on the contactor and connect it to the A1 terminal of the contactor.
+ [* 10] Insert ***wire (4)*** in the ***13NO terminal on the contactor*** and connect it to the ***A1 terminal of the contactor.***
[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.
[* 3] 800mm - 16AWG RED (A-Fork, B-Ferrule) (5)
- [* 10] Insert wire (5) in the 5/L3 terminal on the contactor and connect it to the +24V Red PTFix block.
+ [* 10] Insert ***wire (5)*** in the ***5/L3 terminal on the contactor*** and connect it to the ***+24V Red PTFix block.***