Changes to Step #8
Step Lines
| + | [title] Wire the contactor - Part 2 |
|---|---|
| + | [* 2] 800mm - 16AWG RED (A-Fork, B-Fork) (6) |
| + | [* 10] Route the wire as shown. |
| + | [* 10] Insert wire (6) in the 6/T3 terminal on the contactor and connect it to the +24V Rodent input. |
| + | [* 9] After insertion, attempt to pull the wire to verify that it is securely attached. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added