Changes to Step #8

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the contactor - Part 2
[* 2] 800mm - 16AWG RED (A-Fork, B-Fork) (6)
[* 10] Route the wire as shown.
- [* 10] Insert wire (6) in the 6/T3 terminal on the contactor and connect it to the +24V Rodent input.
+ [* 10] Insert ***wire (6)*** in the ***6/T3 terminal on the contactor ***and connect it to the ***+24V Rodent input.***
[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.