Changes to Step #9

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the contactor - Part 3
[* 2] 700mm - 16AWG BLACK (A-Fork, B-Ferrule) (9)
- [* 10] Insert wire (9) in the A2 terminal on the contactor and connect it to the -24V Black PTFix with the ferrule.
+ [* 10] Insert ***wire (9)*** in the ***A2 terminal on the contactor*** and connect it to the*** -24V Black PTFix*** with the ferrule.
[* 10] Route the wire as shown.
[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.