Changes to Step #10

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the Rodent
[* 2] 100mm - 16AWG BLACK (A-Fork, B-Ferrule) (10)
- [* 10] Insert wire (10) on the -24V Black PTFix with the ferrule and connect it to the -24V Rodent input.
+ [* 10] Insert ***wire (10)*** on the ***-24V Black PTFix*** with the ferrule and connect it to the*** -24V Rodent input***.
[* 10] Route the wire as shown.
[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.