Changes to Step #6

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the Power supply
[* 2] 740mm - 16AWG RED (A-Fork, B-Ferrule) (7)
- [* 10] This wire should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the +24V RED PTFix terminal.
+ [* 10] ***Wire (7)*** should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the ***+24V RED PTFix*** terminal.
[* 3] 740mm - 16AWG BLACK (A-Fork, B-Ferrule) (8)
- [* 10] This wire should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the -24V BLACK PTFix terminal.
+ [* 10] ***Wire (8)*** should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the ***-24V BLACK PTFix*** terminal.
[* 9] After insertion, attempt to pull the wire to verify that it is securely attached.