Changes to Step #6
Step Lines
| [title] Wire the Power supply | |
| - | [* 2] |
| + | [* 2] 600mm - 16AWG RED (A-Fork, B-Ferrule) (7) |
| [* 10] ***Wire (7)*** should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the ***+24V RED PTFix*** terminal. | |
| - | [* 3] |
| + | [* 3] 600mm - 16AWG BLACK (A-Fork, B-Ferrule) (8) |
| [* 10] ***Wire (8)*** should be attached to the power supply [guide|295|stepid=3266] . Route it as shown and connect the ferrule end to the ***-24V BLACK PTFix*** terminal. | |
| [* 9] After insertion, attempt to pull the wire to verify that it is securely attached. |