Changes to Step #11
Step Lines
| + | [title] Wire the VFD PWM control |
|---|---|
| + | [* 2] 900mm - Multicore 2 Conductor - 24AWG (A-2xFork, B-2xFerrule) (11) |
| + | [* 3] Connect the Red wire to the VI input on the VFD. |
| + | [* 4] Connect the Black wire to the ACM input on the VFD |
| + | [* 5] Ensure the VI jumper is set as shown. |
| + | [* 6] Connect the Red and Black ferrules as to the Rodent output as shown. |
| + | [* 7] Ensure the VFD Jumper wire is set between the ACM and FOR terminals. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added