Changes to Step #11

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

[title] Wire the VFD PWM control
-[* 2] 900mm - Multicore 2 Conductor - 24AWG (A-2xFork, B-2xFerrule) (11)
+[* 2] 900mm - Multicore 2 Conductor - 24AWG (A-2xFerrule, B-2xFerrule) (11)
[* 3] Connect the Red wire to the VI input on the VFD.
[* 4] Connect the Black wire to the ACM input on the VFD
[* 5] Ensure the VI jumper is set as shown.
[* 6] Connect the Red and Black ferrules as to the Rodent output as shown.
[* 7] Ensure the VFD Jumper wire is set between the ACM and FOR terminals.