Changes to Step #2
Step Lines
| + | [title] Wire the Power Supply |
|---|---|
| + | [* 10] It is recommended to wire the power supply before installing it in the electronics enclosure. Please connect the following wires: |
| + | [* 2] 200mm - 18AWG BROWN (A-Fork, B-Ferrule) (12) |
| + | [* 3] 200mm - 18AWG BLUE (A-Fork, B-Ferrule) (13) |
| + | [* 4] 200mm - 18AWG YELLOW/GREEN (A-Fork, B-Ferrule) (14) |
| + | [* 5] 740mm - 16AWG BLACK (A-Fork, B-Ferrule) (8) |
| + | [* 6] 740mm - 16AWG RED (A-Fork, B-Ferrule) (7) |
| + | [* 10] Connect all the wires above to the Power Supply, using the Fork connectors on each wire. |
| + | [* 9] After insertion, attempt to pull the wire to verify that it is securely attached. |
Image 1
No previous image
Added