| + | [title] Assemble the door panel - Part 1 |
|---|
| + | [* 2] Rat Rig Universal CNC Electronics Enclosure - Door |
|---|
| + | [* 3] (8x) M6x12 Cap Head Screw + M6 Washer |
|---|
| + | [* 4] Door magnet panel assembly |
|---|
| + | [* 10] Feed the M6x12 Cap Head screws through the M6 washers and into the door panel, then tighten them onto the hex locking nuts on the door magnet panel assembly. |
|---|
| + | [* 9] Take care not to overtighten the M6x12 screw, as you may damage the printed parts. |
|---|
| + | [* 5] (4x) M5x16 Cap Head Screw + M5 Washer |
|---|
| + | [* 6] V-Slot Door Handle |
|---|
| + | [* 7] (4x) M5 Hex locking nut + M5 washer |
|---|