Changes to Step #1

Edit by Rat Rig —

Edit approved by Rat Rig

Before
After
Unchanged

Step Lines

+[title] Assemble the Spool Holder
+[* 2] Lock collars. After you stack this sub-assembly, tighten the set screws on the lock collars to lock the stack in place.
+[* 7] Lead Screw
+[* 3] Ball Bearing 688Z
+[* 5] Cap Head Screw M6x12mm
+[* 6] 3030 Drop-in T-Nut M6. Set in position, but don't tighten yet.
+[* 1] Spool holder printed parts (get the STLs [link|https://github.com/Rat-Rig/V-core-3/tree/main/cad/printed_parts/extra/stl|here]).

Image 1

No previous image

New image

Added

Image 2

No previous image

New image

Added